Deepsikha Enterprises

Applications

The CM or CME pump is primarily used as a built-in pump in OEM solutions and domestic boosters.

It is compact, noiseless, reliable and flexible, and this make it an optimal solution for installation and interaction with other components in a large system.

It can be installed in systems or used as a stand-alone pump

Features and benefits

• Compact design
• Modular construction/customised solutions
• Worldwide usage
• High reliability
• Service-friendly
• Wide performance range
• Low noise level
• High-performance hydraulics
• Electro-coated cast-iron parts
• Customised solutions
• Grundfos motor.

Applications

The SE pumps are designed to optimise the operation of a system. Reliability, simple maintenance, and complete system compatibility are some of the main advantages.

Features and benefits

• Cable plug connection
• Unique clamp connection
• Single-channel and vortex impellers
• Solids passage up to 100 mm
• Unique cartridge shaft seal
• Modular design
• Minimum downtime
• Motor based on premium efficiency components
• Unique liquid-less motor cooling system
• Many sensor options.

The Grundfos CM Booster PS is an automatic booster system for water supply in domestic and agricultural applications as well as other installations where small leakages are expected to occur. The booster system consists of a Grundfos CM pump, a 5-way valve and a pressure switch.

The Grundfos CR series industrial pump offers the highest efficiency of any multi-stage centrifugal pumps in the world; a considerable advantage to the operating efficiency of large pumps. The Grundfos CR pump line is the last word in multistage pump technology.

The CRE is a multi-purpose in-line multi-stage pump with a built-in variable-speed drive available in a wide variety of flow and pressure sizes and is built from AISI 304 grade stainless steel/cast iron.

The Grundfos CRI pump is an in-line, multi-stage pump available in a wide variety of flow and pressure sizes. Built from AISI 304 grade stainless steel, the CRI is ideally suited for water and other non-corrosive liquids.

Grundfos DPK pump is a submersible pump for drainage applications. The compact design makes the pump suitable for both temporary and permanent installation. The pump is cast iron, with side discharge port and integrated submersible 3-phase totally enclosed motor in insulation class F (155°C).

Grundfos DWK pump is a submersible pump for dewatering and drainage applications. The compact design makes the pump suitable for both temporary and permanent installation.

The KPC submersible pump is designed to help you pump water at home, no matter what your need. The pump uses a level or float switch for automatic pump operation, making it ideal for fixed installations for drainage in basements or garages that are subject to flooding.

Grundfos NB end-suction close-coupled pumps are non-self-priming, single-stage, centrifugal volute pumps with axial-suction port, radial-discharge port and horizontal shaft. If you require a multi-purpose pump suitable for a number of demanding applications, the NB ensures reliable and effective supply.

Grundfos NK end-suction long-coupled pumps are non-self-priming, single-stage, centrifugal volute pumps with axial-suction port, radial-discharge port and horizontal shaft. If you require a multi-purpose pump suitable for a variety of demanding applications, the NK/NKG ensures reliable and effective supply.

The SEG range of grinder pumps from Grundfos is specifically designed for pumping effluent and untreated sewage. Key features and benefits include: Cartridge shaft seal system, together with the polyurethane- sealed cable plug system, prevent liquid from penetrating into the motor.

Grundfos TP/TPE pumps are a robust and reliable range of single-stage, in-line centrifugal pumps with a mechanical shaft seal. One of its most characteristic features is the close-coupled design, which means the pump and motor are separate units – securing a high tolerance of impurities in the pumped liquid.

Grundfos TP/TPE pumps are a robust and reliable range of single-stage, in-line centrifugal pumps with a mechanical shaft seal. One of its most characteristic features is the close-coupled design, which means the pump and motor are separate units – securing a high tolerance of impurities in the pumped liquid.

Unilift KP is a submersible pump designed for pumping clean, non-aggressive water and slightly dirty (grey) wastewater such as domestic effluents from septic and sludge treating systems. Max. flow rate, Q: 65 GPM • Max. head, H: 32 feet • Liquid temp.: 32 °F to 122 °F •

Applications

The Grundfos fire pump units are typically used in fire-fighting applications for supplying water to fire-hose reels, fire hydrants or sprinkler systems.

Features and benefits

• Pumps are made according to EN12845 and PrEN12259-12
• Electric or diesel powered
• Designed for superior functionality and performance reliability
• Simple installation and easy maintenance
• Compact design
• Customised and reliable solutions
• Widest range from one supplier.

Compact, reliable and flexibleThe pump is designed to fit seamlessly with other components in small and large systems or as a stand-alone pump. CME pumps feature an integrated frequency converter, intelligent features that make installation and service easy, and an energy efficient E-drive that meets IE5 standards.

Grundfos TP/TPE pumps are a robust and reliable range of single-stage, in-line centrifugal pumps with a mechanical shaft seal. One of its most characteristic features is the close-coupled design, which means the pump and motor are separate units – securing a high tolerance of impurities in the pumped liquid.

Applications

The pumps are suitable for:

• Groundwater supply to waterworks
• Irrigation in horticulture and agriculture
• Groundwater lowering
• Pressure boosting
• Industrial applications.

Features and benefits

• State-of-the-art hydraulics provide high efficiency and low operating costs
• 100 % stainless steel inside and outside
• Sand resistant
• Resistant to aggressive water
• Motor burnout protection
• Dry-running protection
• Monitoring, protection and communication via the MP 204 protection unit and the R100 remote control.